Bristol Business Interiors install two types of access control system:

This type of system may be used to control access on one or many independent doors in a building. Access is gained by using a numeric code, or PIN with a keypad, or by presenting a proximity or magstripe token, depending on which type of reader is fitted.

Typical applications

• Small business premises
• Sports clubs
• Storage units
• Any small or medium sized site requiring access control

Click here for more information on our standalone products.

Referred to as 'PC based' or 'Networked' access control, these systems may be used to control one or many doors in a building. Access is gained by using a numeric code, or PIN with a keypad, by presenting a proximity or magstripe token or by 'possesion' with hands free tokens depending on which type of reader is fitted. PC based access control offers central control, via a network.

Reports may also be generated to see who went where and when. Many systems allow control of additional buildings via existing LAN/WAN. PC based systems are increasingly being used to control other services within buildings, for example intruder alarms, fire doors, lifts and lighting.

• Small/medium premises
• Large corporate premises
• Multiple-site premises
• Government buildings
• Universities
• Sports clubs
• Car parks

Standalone systems

We install two standalone systems, offered to satisfy both low and medium-high security applications.

Compact system

A standalone solution where all of the control electronics are in the keypad or reader. Compact systems are an easy to administer and cost-effective means of controlling access to a building. However, as the control electronics are all housed in the reader or keypad this type of system is not recommended for exterior or high security interior doors. Compact systems are available in a choice of TOUCHLOCK keypads, PROXIMITY readers or CARDLOCK (magstripe) readers.

Access is gained by using a code or PIN with a keypad, or by presenting a valid token to readers. Simple token management using our token packs makes administration straightforward.

Key features

• 10,000 users (PROXIMITY & CARDLOCK), up to 50 codes (TOUCHLOCK)
• Simple token management
• Scaleable; systems can be added to easily
• Available as PROXIMITY, magstripe (CARDLOCK) or keypads (TOUCHLOCK)

Typical applications

• Small business premises
• Sports clubs
• Any low-risk internal door
• Apartment complexes
• Storage units

Switch2 system

A standalone solution, which uses a separate control unit for higher security. The Switch2 control unit is housed on the inside or safe side of the door. The control unit is used in conjunction with a Paxton Access reader or keypad. This provides higher security than a compact system. Switch2 is the standalone solution for external and higher security internal doors.

Switch2 systems are available with a choice of PROXIMITY or CARDLOCK (magstripe) readers or TOUCHLOCK keypads. Switch2 has a larger range of compatible readers than Compact and may also be used with a combined keypad/proximity reader. Access is gained by using a code or PIN with a keypad, or by presenting a valid token to readers. Simple token management using our token packs makes administration straightforward.

Switch2 systems can be fitted to one or many doors in a building. Additional doors may be added as required.

If you are choosing a standalone system but may want to upgrade to a PC based system in the future, Switch2 is the right choice. Only the control unit would need to be replaced. Readers and other hardware are compatible with both systems.

Key features

• 10,000 users (PROXIMITY & CARDLOCK), up to 50 codes (TOUCHLOCK)
• Separate control unit and reader (high security)
• Simple token management
• Scaleable; systems can be added to easily
• Relay output
• Available as PROXIMITY, magstripe (CARDLOCK) or keypads (TOUCHLOCK)

Typical applications

• Small business premises
• Sports clubs
• Schools
• Apartment complexes
• Storage units
• Sites requiring high security
• Carpark barriers

PC based systems

We install Net2, an advanced PC based access control solution that will give you control over who has access to your building. With Net2 you can control access on hundreds of doors for up to 10,000 users. Our software allows you to manage this in a logical and intuitive way.

Net2 is one of the most economical access control systems on the market. There are no hidden costs such as per seat licences; the software may be loaded on all the PC’s in a building if required. The standard version of our software, which includes all the features most organisations will need, is free.

Perhaps even more importantly your investment is future proofed. Adding additional doors in your building as your needs change is straightforward and cost effective. In addition, all new innovations to the system are designed to be backward compatible. Software upgrades are free.

Net2 offers the key requirements of a PC based access control system.

• Central control
• Flexible access permissions
• Reporting

The software gives you full control over the system from your desk. Any instructions given to the software are immediately updated at all the doors. Adding users, barring users and changing users’ access permissions are all done from the PC quickly and easily.

Access permissions may be set individually or by department. This makes setting up different permissions for different groups of people quick and straightforward. Some areas may be restricted to only a certain group of users. Shift patterns may be set for departments, and those permissions are allocated instantly when a new user card is issued.

An events screen allows viewing of ‘real time’ events as they are happening. Monitor who is where in a building, if doors have been left propped open or a door been forced. In addition to the ‘live’ information, reports can easily be created from the software.

Net2 software can be loaded onto one or many PC’s in your organisation. Different administrative rights may be given to each user. Perhaps the Security Manager would be the only person who could alter users’ access permissions, but it may be convenient for your receptionist to be able to issue cards for visitors. Up to five PC’s on a network may administer the system simultaneously.

Net2 systems may be used with a choice of PROXIMITY, Hands free, CARDLOCK (magstripe) readers and TOUCHLOCK keypads. Net2 is also compatible with a range of 3 third-party readers, including biometric readers.

Net2 has even more to offer!

All of the above are the essentials of a good PC based access control system. Net2 however, offers even more functionality.

Nominate those who have permission to unset and set the intruder alarm. When they present their token to the door, the alarm will unset prior to the door unlocking. If the alarm is set, only these nominated people will be able to access the building. This easy-to-use feature helps prevent false alarms.

Through its easy-to-use ‘Triggers and Actions' function, Net2 can send SMS or emails when a specified trigger happens. Get an SMS message sent to your mobile if a door is forced; have an email sent to you when staff arrive late!

See who is at the door, before you let them in. View what is happening throughout your building.

Turn lights on when you arrive in the morning; turn them off when the alarm is set at night - easy with ‘Triggers and Actions’.

Hands free access control enables any Net2 door equipped with P series PROXIMITY readers to achieve hands free ranges of up to 2.5m. Doors are converted to hands free simply by wiring a hands free interface between the reader and control unit. Hands free tokens are then supplied to users who require hands free access. Both standard Net2 and hands free tokens will work on a Net2-equipped door.